Skip to main content

Dis Mafs Resources Sdn Bhd, 43200 Cheras Selangor

BPS-Twin-18.0-RSE

for cars and trucks until 18 t axle load
BPS-Twin-18.0-RSE
SVP410118
Scope of supply
  • 2 roller sets, hot-dip galvanised, for installation in an inspection pit, suspended installation, welded roller profile, 20 m pre-wiring to the control box
  • Control box with motor protection switch, control electronics, operating elements and main switch lockable, prepared for connection of side slip and axle suspension, water jet-proof IP 65
  • TÜV-tested and approved for § 29 inspection
Description
  • 2 split roller sets, hot-dip galvanised, suspended installation with watertight, maintenance-free roller bearings
  • Standard raised roller by 40 mm on the access side, exit side at ground level. The raised roller is implemented through shimming with compensation plates beneath the bearing blocks. This allows ground-level or raised positioning of the rollers at any time
  • Drive motors with planetary gears, enormous motor power with minimal power connection values,
  • Low-wear running rollers with welded profile surface (optionally grit-coated)
  • Test unit control: Manual / automatic operation, delayed automatic switch-on, slip switch-off, pointer stop, automatic restart, switch-off after driving out of the test bed, start-up monitoring and drive-off assistance
  • Wear-free, electronic DMS measuring system with shear force transducer
Technical data for displays / control
  • Pointer display, housing dimension W x H x D: 810 x 670 x 70 mm
  • Brake force display, 172 °: 2 x 400 mm Æ mm
  • Supply voltage pointer display: 240/110 V, 50/60 Hz 16 A slow fuse
  • Weight pointer display: 10 kg
  • Electrical/switch box, housing dimension W x H x D with 2 test speeds (frequency converter): 500 x 700 x 250 /600 x 800 x 250 mm
  • All housing painting: basalt grey RAL 7012
  • With frequency converter, customer-supplied all-current sensitive residual current circuit breaker with min. 0.3 A required
Technical data- deviating to 13.0 t
  • Weight per roller set: 460 kg
  • Roller diameter: 268 mm
  • Roller centre distance: 440 mm
  • Traversable axle load: 18 t
  • Testable axle load at 50% braking: 14 t
  • Maximum braking power: 34 kN
  • Nominal power of drive motors: 9 kW
You want more Information please drop us a message here:

We use 'Honeypot'

A GDPR-friendly CAPTCHA alternativefor blocking spam that does not rely on external services.